\\r\\n
Drive Side Bearing for Lui 50 J50 J100 J125 3 speed ... M219
Rear hub bearing BGM with oil seal for series 1, 2. 3 & Gp.
Rear axle layshaft bearing (rear hub bearing)for all J Range and Lui Vega/Lui75 Cometa models... CASA...
Small end bearing 16x20x22mm fot GT pistons and others that require a wider bearing, Yamaha wide type....
High spec MB 16x20x20 14 needle small end/little end bearing.
High spec Ina 16x20x20 14 needle small end/little end bearing....
Bronze bush/bearing for the crown wheel,normally fitted to gp s but they can be fitted to li/SX and TV...
0.3mm Mb reear hub bearing plate in stainless steel and is flat on one side.
0.5 / 0.7 recessed Mb rear hub bearing plate in stainless steel
0.9 / 1.2 Mb rear hub bearing plate in stainless steel and has a recess on one side of 0.9mm recess on...
Mb rear hub bearing O ring seal.. fits in the recess in the bearing to form a better seal..
Mb reear hub bearing plate set of 3 in stainless steel .
ist Oversize rear hub bearing to be used in engine casings that the rear hub bearing aperture is slightely...
2nd Oversize rear hub bearing to be used in engine casings that the rear hub bearing aperture is slightely...
3rd Oversize rear hub bearing to be used in engine casings that the rear hub bearing aperture is slightely...
Rear hub bearing made by Scootopia. We think these are the best.
Front Hub bearings (Fag) & oil seal set for Series 1,2,3,Gp, Lui & J
Granturismo Small end conversion bearing KV16x22X20 RB TS1 Conversion Bearing for a 22mm con rod to take...
Mag house bearing spacer ring for li/lis/tv/sx bearings.
Rear hub bearing double row with snap ring, felt & retaining plate. especially used with AF 5 speed gearbox...
Granturismo Small end conversion bearing KV16x22X22 Conversion Bearing for a 22mm con rod to take a 16mm...
Brass bush/bearing with oil grooves for the crown wheel,normally fitted to gp s but they can be fitted...
Layshaft needle roller bearing. A high quality layshaft needle bearing. made by INA
Main Drive Bearing Fag comes with extra seal fitted one side for extra protection.. fit with seal facing...
Gp Flywheel Brass caged bearing for all Gp/Dl type crankshafts. This bearing will fit GP taper type crankshafts...
3 Piece gear cluster bearing and bush set, comprising of: Gear cluster bearing. Bush. Shim (fits under...
Top steering bearing set for all models. 6 piece set.. From factory, these were originally fit to models...
Gp/Dl FAG high load flywheel bearing for all Gp/Dl type crankshafts..This bearing will fit GP taper type...
L shaped washer sits inside your magneto housing and holds one of the oil seals in place....
Li/Sx/Tv crank type only, Fag flywheel bearing..
High quality Clutch needle bearing.. Used as standard on Li, SX, TV models.. two needed
Gear cluster needle bearing...This sits in underneath the gear cluster....
Steering/fork bearing set (top & bottom) for series 1,2,3 and Gp/Dl .
INA clutch needle bearings..2 per engine.. SOLD IN PAIRS ....
COMPLETE 8 PIECE PREMIUM BEARING SET for engines that are using a gp type crankshaft. THIS SET INCLUDES...
Steering Bearing (top) made in Italy by Casa Lambretta,best quality....for Series 1,2,3 and Gp....
Front Hub bearing, FAG best quality....for Series 1,2,3 and gp.
S1 & early series 2 LI & TV.Bottom steering bearing kit. : lower frame cup : bearing : fork race (depth...
Bottom steering bearing kit for LI, SX, TV, DL & GP. Deep bottom steering kit (total cone depth is 46mm)...
Gear cluster bearing, Ina high quality gear cluster needle bearing.
COMPLETE 9 PIECE BEARING SET FOR LI/SX/TV SERIES 2 & 3 LAMBRETTA SCOOTER... inc REAR HUB BEARING, All...
Small end/little end bearing 20x20x16 made in Germany by INA these are very good quality
Small end/little end bearing 13 roller silver caged 14x20x20